<video id="n5ys6"></video>
        <video id="n5ys6"></video>
          ISE, Inc.  -- Quality Products and Services Since 1946
           

          Search:     

           

          TIMERS and COUNTERS

           

          For Obsolete Products Click Here

          General Purpose Timers

          Plug This Electronic Timer in to Replace Any of your EAGLE HP5 Electro-Mechanical Timer!
          Tenor Model 655-8-3000 is a plug in replacement timer for all Eagle HP5 series timers. This unit has DIP-Switch selectable time ranges from 0.001 seconds to 200 hours. Its unique design allows installation without wiring or housing changes in most applications. This timer allows the setting of the time set point even when no power is applied to the timer. The 655 is competitively priced with mechanical units and offers increased accuracy & reliability due to its electronic construction.

          Literature: ATC/TENOR 655 Multi-Range Timer; Direct Plug-in (Digital) Replacement for Eagle HP5 Series Timers (Round Case)

          Installation Manual: 655

          The ATC 652 is a micro-processor-based timer with a 4-1/2 digit LCD display that can provide an indication of either preset time remaining or elapsed. There are five timing ranges covering time values from one millisecond to 199 hours 59 minutes. The unit has both an instantaneous relay output and a programmable relay output which can be programmed for any one of 14 different timing modes. Includes Repeat Cycle Mode with adjustable ON and OFF times.

          Time Ranges
          0.001 SEC to 19.999 SEC
          0.01 SEC to 199.99 SEC
          0.1 SEC to 1999.9 SEC
          1 SEC to 199 MIN 59 SEC
          1 MIN to 199 Hr. 59 MIN

          Timing Modes:
          ON-Delay, Interval, Reverse Start Delay Reverse Start Interval, Momentary Start Accumulator, Repeat Cycle-OFF First Repeat Cycle-ON First, Repeat Cycle Reverse Start-OFF First, Repeat Cycle Reverse Start-ON First, Repeat Pulse Repeat Pulse, First Pulse Immediate Repeat Pulse-Reverse Start, Repeat Pulse, First Pulse Immediate Reverse Start

          Literature: Tenor 652 Multi-Range Timer

          The ATC 653 is a micro-processor-based control that can function as either a Timer or a Counter. The ATC 653 has a 4-1/2 digit LCD display that can provide an indication of either the time or count value remaining or elapsed.

          There are five timing ranges covering time values from one millisecond to 199 hours 59 minutes. There are also three count speeds to a maximum of 7500 counts per second.

          The unit has an instantaneous relay output and a programmable relay output which can be programmed for any one of 14 different timing modes. The timing range, count speed and timing mode are programmed with an internal DIP switch assembly.

          The time or count value is preset by the operator using the keypad on the front face. The keypad can also be used to perform secondary functions such as reset, immediate time/count out, time/count inhibit, changing the direction of the display, displaying the number of cycles run, and clearing the cycle counter. The Model 653 is housed in a standard 15-terminal plug-in round case.

          Literature: Tenor 653 Multi-Range Multi Function Timer/Counter; Enhanced Capabilities

          Timing Modes: 653  
          Installation Manual: 653

          EAGLE HP5 Cycleflex is a Motor Driven Electric Reset Timer in the standard CYCL-FLEX? plug-in housing. It includes a red progress pointer to display remaining time interval, pilot light indicates when timer is running. Knob adjustable time setting.

          Literature: Eagle Cyclflex HP5 Electric Reset Timer
          The EAGLE CX200 Series (CX202A6 for 120VAC Power Source) is a Microprocessor Timer/Counter with 199.99 seconds to 199.98 hours delay or 19999 Counts. Supports On-delay/standard start, OFF-delay/reverse start, interval/one-shot, asymmetrical repeat cycle. Timer is housed in a standard 15 terminal CYCLFLEX plug-in case.

          Literature: Eagle CX2 Series Electronic Timer/Counter
          The EAGLE CX300 Series (CX312A6 for 120VAC Power Source) is a Microprocessor Timer/Counter Time range and the type of start input switch operation are programmed with 7 miniature rocker switches located inside the unit housing. The front panel of the CX300 is a sealed membrane keypad which provides excellent protection for most industrial environments. This Timer includes additional timer/counter modes not available in the CX200 series.

          Literature: Eagle CX3 Series Electronic Timer/Counter
          Models AT8N 1/16 Din Multi-Range Time Delay Relays offer timing ranges from 0.05 Second to 100 Hours. Eight (8) pin socket connections. Can be socket or panel mounted. Six programmable output modes are included.

          Literature: AT8N Multi-Function, Multi Range Timers, 1/16 DIN, 8 Pin Base

          Installation Manual: AT8N

          Models AT11DN and AT11EN 1/16 Din Multi-Range Time Delay Relays offer timing ranges from 0.05 Second to 100 Hours. Eight (11) pin socket connections. Can be socket or panel mounted. Six programmable output modes are included.

          Literature: AT11DN / AT11EN Multi-Function, Multi Range Timers, 1/16 DIN, 11 Pin Base

          Installation Manual: AT11

          ATC 305E is a Motor Driven Electric Reset Timer in the standard plug-in housing. It includes a progress pointer to display remaining time interval, pilot light indicates when timer is running. Knob adjustable time setting

          The 305E provides delay, interval or pulse timing function for up to 7 load circuits through two instantaneous and two delayed switches. It features a plug-in design and cycle progress indication.

          Literature: ATC 305 Analog Motor Driven Timer
          The ATC 353 is designed for use in DC start logic control systems It provides interval, delayed or repeat cycle pulse control of a SPDT relay.

          72mm x 72mm plug-in housing
          Output Relay SPDT 5A @ 120VAC
          High Visibility Vacuum fluorescent Digital Display
          Up/Down Toggle levers for setting and adjustment of preset time.
          Display of Preset at all times, without power
          Field convertible Timing Ranges 0.01 - 99.99 Sec. or Min. 0.10 - 999.9 Sec. or Min.

          Literature: ATC 353 Series Multi-Range (4) Digit Timer DC Start (2.60" Square Case)

          The ATC 355 Timer is a four digit panel mounted indicating timer designed for the most demanding industrial control applications. 72mm x 72mm plug-in housing
          Two Output Relays DPDT Instantaneous and DPDT Delayed
          High Visibility Vacuum Fluorescent Digital Display
          Up/Down Toggle levers for setting and adjustment of preset time.
          Display of Preset at all times, without power
          Field convertible Timing Ranges 0.01 - 99.99 Sec. or Min. .010 - 999.9 Sec. or Min.
          UL, CSA, CE Approved

          Literature: ATC 355 Series Multi-Range (4) Digit Timer (2.60" Square Case)

          The ATC 365 Timer is a microprocessor based digital timer with three rotary switches for setting and adjustment.Preset. Timing (.01 Sec. to 999 Hrs) and display options (time-up or time-down) are switch selectable. Plug-in panel mounting allows replacement without removing field wiring.

          72mm2 Plug-in Housing
          NEMA 12 sealed front panel
          High Brightness VF Display
          Timeup or timedown from Preset
          Nine Selectable Timing Ranges
          .01 to 9.99 - 99.90 - 999 Sec, Min, Hrs.
          DPDT Instantaneous Relay
          DPDT Delayed Relay

          Literature: ATC 365 Timer Literature

          The ATC 405 is a 1/16 DIN style timer which can be panel mounted or plug-in using an 8-pin octal mounting socket. Available in two versions. On Delay with instantaneous and delayed relays, or On-Delay/Interval with two delayed relays. Each 405 offers Timing Ranges from 1 Sec. to 10 Hrs. or 5 Sec. to 50 Hrs and Universal Voltage Operation.

          1/16 DIN standard housing for panel mounting or plug-in
          Universal Operating Voltage 24VAC to 240VAC or 24VDC
          Output Relay DPDT 10A @ 120VAC

          Six (6) Switch Selectable Ranges
          1 Sec., 10 Sec., 1 Min., 10 Min., 1 Hr., 10 Hr., or 5 Sec., 50 Secs., 5 Min., 5 Hrs., 50 Hrs.

          Two separate Models:
          On-Delay with (1) Instantaneous and (1) Delayed Output or On Delay/Interval with (2) Delayed Outputs

          Large Watertight Setting Knob
          8-Pin octal base
          Cycle Progress LED
          UL, CSA, CE, FM Approved

          Literature: ATC 405 Series Multi-Range Timer with Instantaneous Relay, Universal AC/DC Powered (1/16 DIN) 8 Pin Base

           

          Installation and Operation

          ATC 405AR Timer offers:
          Two modes of operation, On Delay or Interval timing modes. The unit has a set DPDT output contacts rated for 10 Amps. When in ON-Delay Mode, the contacts transfer at time out. When in the interval Mode, the contacts transfer when power is applied and released at time out.

          Universal Power: 20 to 240V AC or 12 to 240V DC power.

          1/16 DIN Housing and plugs into standard 8 Pin Round Socket for wiring.

          Literature: ATC 405AR Series Multi-Range Timer, Universal AC/DC Powered (1/16 DIN) 8 Pin Base

          ATC 407 1/6 DIN Multi-Mode Multi Range Timer
          Selectable On-Delay / Off-Delay / Interval Timing Modes
          Separate Start Input
          Output Contacts rated 10A at 120/240 VAC and 30 VDC

          Six Timing Ranges in a single unit:
          1 and 10 sec., min., and hours
          5 and 50 sec., min., and hours

          Universal Power Supply; 24-240 VAC and 24 VDC
          48mm2 DIN Standard housing
          Large and easy to read dial
          Round (11 PIN) socket mount or mount in panel cutout
          Watertight when panel mounted
          Range and Mode select are tamper proof when panel mounted
          Unique flashing cycle progress indication

          Literature: ATC 407 Series Multi-Range Timer with Instantaneous Relay, Universal AC/DC Powered (1/16 DIN) 11 Pin Base

          Installation & Operation: ATC 407

          ATC 409 Push Button Start, Interval Timing Mode Push Button Integral to front dial
          Output Contacts rated 10A at 120/240 VAC and 30 VDC

          Six Timing Ranges in a single unit:
          1 and 10 sec., min., and hours
          5 and 50 sec., min., and hours

          Universal Power Supply: 24-240 VAC and 24 VDC
          48mm2 DIN Standard housing
          Large and easy to read dial shows decimal points
          Round (8 PIN) socket mount or mount in panel cutout
          Watertight when panel mounted
          Range and Mode select are tamper proof when panel-mounted

          ATC 409 Series Multi-Range Push-Button Start Timer, Universal AC/DC Powered (1/16 DIN) 8 Pin Base

           

          ATC 417 True Off-Delay Timer
          Output contacts rated 10A at 120/240 VAC

          Three timing ranges in a single unit:
          10 sec., 1 min., 10 min.
          5 sec., 0.5 min., 5 min.
          Universal power operation: 24 VAC to 240 VAC and 24 VDC

          8-Pin or 11-Pin mounting.
          Remote reset models.
          48mm2 DIN standard housing
          Watertight when panel-mounted
          Range selection is tamper-proof when panel-mounted.

          ATC 417 Series Multi-Range True Off Delay Timer, Universal AC/DC Powered (1/16 DIN) 8 or 11 Pin Base

          Installation and Operation 417
          ATC 425 Timer with Easy-To-Read High Intensity Green LED Display
          Timing From .01 Sec. to 999 Hrs in One Unit
          Switch Selectable Timing Ranges Are Tamper Proof When Panel Mounted
          Timing LED Indicates Output Relay Status
          Time Preset Can Be Adjusted While Timing
          Panel Mounting or 8-pin Octal Plug-in mounting
          Timing Up to or Down From the Set Point

          ATC 425 Series Multi-Range (3) Digit Timer with LED Display (1/16 DIN) 8 Pin Base

           

          Time Delay Relays

          ATC 314 is an economical multi-range solid-state Time Delay Relay.

          Available as Off-delay (delay-on-break) and Interval On-Delay operation.

          Three dial-selected adjustable ranges, it provides any timing period between 0.035 and 100 SEC

          ATC 314 Series Off-Delay/Interval Time Delay Relay 11 Pin Base
          ATC 319 Time Delay Relay

          2 ranges available:
          .3 Sec., 3 Sec., 30 Sec., 3 Min., 30 Min.
          1 Sec., 10 Sec., 100 Sec., 10 Min. or 100 Min.
          High Accuracy
          Universal Input Power Supply
          Output Relay DPDT 7A @ 120VAC
          Indicating LED turns on during timing
          8-pin octal plug-in base

          Literature: ATC 319 Series Time Delay Relay AC or DC Operation 8 Pin Base

          Installation and Operation: 319

          Our ATC 328 Multi-Range Multi-Function Timer is a versatile dial-adjusted time delay relay, which provides a choice of On-Delay, Off-Delay or interval operation for any timing period between 50 milliseconds and 10 hours. The Timer features cycle progress indication and is suitable for the most demanding industrial service.

          ATC 328 Series Multi-Range Time Delay Relay with Progress Indication Square Relay Socket Base

          ATC 339 Time Delay Relay

          An economical solid-state TDR with octal plug-in base

          Two models are available. Each has six dial selected ranges from fractions of a second to as long as 10 hours.

          Each model has a selectable on-delay or interval timing mode.

          ATC 339 Series Multi-Range Time Delay Relay 8 Pin Base

          ATC MTA Series Multi-Function, Multi-Range Time Delay Relay, 11 Pin Base. 

          Time Ranges from 1 sec to 10 days.  16A Rated Output Contacts

           

           

           

          DIN Rail Timers

           

          Repeat Cycle Timers

          The ATC 422AR Flip-Flop Timer is a Repeat Cycle Timer with adjustable ON and OFF times. Two knobs are used to individually adjust the times. The 422AR can be configured with either the relay being energized during the first timing period or de-energized during the first timing period.

          The 422AR include 6 selectable timing ranges that can be set individually for the ON and OFF time. The ranges are 1 and 10 SEC/MIN/HRS dip switch selectable. Having this flexibility allows for a load to be energized for a brief time over a cycle that lasts up to 10 hours.

          The 422AR 1/16 DIN housing is compact, and designed for panel mounting. The timer is mounted in an 8-pin round socket. The 422AR is universal powered by 20 to 240 VAC or 12 to 240 VDC operation voltage.

          The output of the 422AR Flip-Flop timer is DPDT mechanical relay contacts 10 amps. Individual LED indicators for ON time and OFF time are included and also provide progress indication.

          Literature: ATC 422AR Series Multi-Range Repeat Cycle Timer, Universal AD/DC Powered (1/16 DIN)

           

          Elapsed Time Indicators

           

          Counters

           

          Miscellaneous

          ATC 324 CAM Operated Sequence Control Timer

          CSA and UL Recognized
          Easy and precise Cam adjustment
          One to twelve precision switches.
          Wide range of cycle times—270 cycle times between 3 sec and 60 hrs.
          Repeat accuracy and setting accuracy within ±1/4%.

          ATC 324 Series Motor Driven Cam Timer
          ATC 7DT-2CH Series 7 Day Timer is a DIN Rail Timer, ideally suited for timing applications needing a daily or weekly schedule.

          LCD display provides visible indication of output, mode, day and time. Includes two independent channels and 16A contacts, the 7DT-2CH 7 Day Timer provides high accuracy in a convenient DIN Rail mounting package.

          ATC 7DT 7-Day Timer, 2 Channel Output
          ATC 765 Series Programmable Count Time Control is the perfect alternative to cam timers and micro PLC’s for simple sequential applications.

          Microprocessor-based, it offers 100 control steps, 8 programmable relay outputs, functions with count input signals or timed input with 4 timing range values from 0.01 seconds to 99 hours/59 minutes and a host of other primary and secondary keypad functions.

          Tenor 765 Sequencer; Replaces motor driven cam timers with digital accuracy.
           

          ISE, Inc. Links

          ISE, Inc.
          10100 Royalton Rd.
          Cleveland, OH  44133 USA
          Tel: 440-237-3200 - Fax 440-237-1744
          Email ISE Email ISE Cleveland

           

                
           
           

          ISE, Inc. Privacy Policy

          Copyright ? 2020 ISE, Inc.  All rights reserved.     ISE Credit Cards Accepted

          VARIAC? is the registered trademark of ISE, Inc.

          靠谱的真金棋牌